How to Remove Office Chair Base? Whether you have a nice desk chair, a basic one from amazon, or a cheap office chair from Walmart, chances are your chair has a base. This is probably what keeps the chair from rolling away and there’s something you need to know about them.
The base for most chairs is one of three types: plastic, metal, or fabric. The type of base on your chair will determine how best to remove it. If you have a plastic or metal base, then all you need to do is unscrew the bolts holding that part in place and voila! It’s gone. But if, like me, your office chair has a fabric base…well you’re going to have to get a little creative with this one.
What is an office chair base?
The bottom of most chairs is a base made of plastic, metal, or fabric. Chairs with a plastic or metal base can be removed by unscrewing the bolts that hold them in place. With fabric bases, you’ll need to replace the chair’s feet with new ones.
The most common type of office chair base is a fabric one. Fabric bases are meant to be more comfortable for your feet and lower back because they’re softer than other types. The problem is that fabric bases also tend to collect dirt and grime over time which makes it difficult to remove the chair’s base from the floor without damaging it.
If you’ve ever tried removing a fabric-based office chair’s base, you know that it often comes apart in pieces (sometimes the entire foot falls off). This leaves the part of your chair on the floor and part of it stuck in its original position. We all know how frustrating this can be when you want to move your desk around or even just clean underneath it!
So what should you do if you have an office chair with a fabric-based? One option would be to replace the old feet with new ones; this will make removing the old base much easier. But if you don’t want to replace them
Which Type of Base is It?
So, you have that pesky base to your chair and you’re looking for a way to remove it. The type of base on your office chair will determine how best to remove it. If you have a plastic or metal base, then all you need to do is unscrew the bolts holding that part in place and voila! It’s gone. But if, like me, your office chair has a fabric base…well you’re going to have to get a little creative with this one.
For those who find themselves in this situation, I recommend trying some WD-40 or any other lubricant that “breaks down adhesion” if your fabric base is still attached after unscrewing everything (which can be really difficult).
Spray it around the bottom of the fabric and wait for the lubricant to work its magic before tugging at the fabric until it starts coming off. Make sure not to spray too much or apply an excessive amount of pressure because this could rip or tear the fabric.
If using WD-40 doesn’t do the trick, go online and search for “removing office chair bases.” There are many tutorials on finding ways to get rid of that pesky fabric without damaging it by tearing it and how to remove them.
Types of bases
You may be able to simply pull up on the base and it will come cleanly out of its position. But if you find that this doesn’t work, don’t worry. There are other methods for removing those pesky bases as well.
Metal or Plastic Base:
- Place a towel on the office chair’s base and unscrew the bolts with a screwdriver. Be sure the towel is in the direct path to catch any drops of oil or debris that might come out during this process.
- Once you have successfully removed all bolts from the base, place a new towel under it and unscrew it from the chair’s seat using pliers.
You can try tugging at one end of the fabric until you feel it start to give way which will make it easier for you to rip off more fabric around its edges. This technique can be very time consuming but has been proven successful for some people.
How to Remove Plastic or Metal Bases
There are two ways to remove plastic or metal bases. The first is the easiest but requires a little bit of elbow grease. You can either use your hand to screw off the bolts or use pliers to unscrew them.
The other option is much quicker but also more difficult. This one will require you to drill off the bolts with a power drill and then remove them with pliers. Make sure you use safety goggles when drilling!
How to Remove Fabric Bases?
If you have a fabric base, then chances are the bolts that hold it in place are also threaded into the base. To remove them, you’ll need to cut through the seam and sew it back up again once the base is removed.
This might sound like a lot of work, but it’s totally worth it in order to get your office chair’s base off without any hassle. If you live near a fabric shop or know someone who sews well, then this shouldn’t be too hard at all.
Obviously, if you don’t want to get creative with your sewing machine then you could always just buy a new chair. However, this will end up costing more money than removing the bolts from your old one and buying a new bolt from whichever hardware store carries them.
Tip for Safe Removal of Base from Chair.
Before you start any of this, make sure the chair is not in use. Then, grab a screwdriver or wrench. You are going to need to unscrew the bolts on the base and remove them from the chair before you can detach them.
Next, lift up on the footrest and disconnect it from the base. This will release your chair from its stationary state and give you room to work with.
Once you’ve done that, make sure to place the chair on a hard surface like concrete or wood if possible because this will help avoid scratching your flooring while you’re working.
Now, locate and unscrew any bolts that might be holding together your base and the rest of your chair (if they aren’t already unscrewed). If there is a zipper, unzip it so that it goes all the way around so you can get at anything underneath it.
Once all of these steps have been completed, gently pull up on one side of your fabric seat until it starts to separate from its metal frame. Once this happens, keep pulling until the whole seat comes out completely. It may take some work but trust me: It’s worth it!
5 Steps for removing office chair base
First things first, you’ll need to figure out if your office chair has a fabric base. If it does, then you’ll need to take off the armrests and take out any screws that are holding them in place.
Next, you need to find something flat with a little bit of weight to use for this next part. I used the leg of an old table that I’d taken apart because it had a nice flat edge. You could also use a piece of wood or anything that’s sturdy enough not to break while you’re using it.
Place one end of your flat object against the front of the base and then gently lean into the chair until the back pops off. Now you should be able to pull up on
How Do You Remove A Stuck Base From A Chair?
The first step is to find a way to get the fabric off of the base. Grab a butter knife and carefully cut the fabric away from the metal string that is holding it on. Once you have cut away as much as you can, use a screwdriver or anything else sharp to pry the fabric off of the metal. Be careful not to damage your office chair’s plastic or metal base, if it has one!
Another method is to use a vacuum cleaner and suck the fabric up with it. This will work best if you have long hair that you can tie into knots around your hand or something similar. You then place one end into your vacuum cleaner hose and hold it in place while sucking on the other end with your mouth (I know this sounds gross but trust me, it works).
If neither of these methods works for you, then there are some other things you can try. One option would be to purchase new chair legs from an office supply store or furniture store like Ikea. The other option would be to glue them onto your chair legs so they don’t come off again!
You may need to remove a base from an office chair in order to make it more comfortable when sitting. There are a number of bases to choose from when finding a chair for your office. A metal base is typically stable and often has a bit of a higher weight capacity.
It is important to understand the different types of bases before choosing one for your desk chair. When removing a base from an office chair, you’ll need to find the best way to remove the base. Metal bases often use hex screws and can be unscrewed with a hex key.
Fabric bases typically use loops that can be removed with pliers or cut off with scissors. Plastic or faux leather bases may need to be cut off with a utility knife or razor blade. To avoid injury, it is important to ensure the blade is sharp before cutting.
Related Informational Searches:
If you wanna know more about the office chairs & gaming chairs, You can check our other blog posts:
- How to Fix a Squeaky Office Chair?
- How to Make Office Chair More Comfortable?
- How to Disassemble an Office Chair? [Best Guide]
- How to Clean a Gaming Chair? – A Complete Step-by-Step Guide.
- How Tall is the Unicorn Gaming Chair? – Our Review of The Best Gaming Chairs.
For further related details, You can visit our official website (furniturepik.com).